ROW INC. Encapsulated Gaskets and O-Rings ROW INC. Encapsulated Gaskets and O-Rings
Contact ROW INC.
About ROW INC.
ROW INC. Site Map
ROW INC. back to Home
ROW INC. Encapsulated Gaskets and O-Rings
ROW INC. O-RingsROW INC. Encapsulated GasketsNew Products from ROW INC.Choose Encapsulated Gaskets and O-Rings from ROW INC.Tech Specs for ROW INC. ProductsTest Reports for ROW INC. ProductsEngineering Tools for using ROW INC. Products

Technical Specifications

Elastomeric Core Options

  • Solid silicone to ZZ-R-765 CLASS 2B/70 DURO-FDA Compliant
  • Hollow silicone to ZZ-R-765 CLASS 2B/70 DURO-FDA Compliant
  • Viton (75 DURO) to AMS 3216 (formerly MIL-R-83248C)
  • EPDM 70 DURO-FDA Compliant

Encapsulation Options

FEP (Fluorinated Ethylene Propylene)

  • Clear
  • Upper temperature limit: 400°F (204°C)
  • Excellent chemical and corrosion resistance
  • Will not absorb moisture
  • Excellent resilience
  • Smooth/self-lubricating surface
  • FDA Compliant
  • USP Class VI approved

PFA (Perfluoroalkoxy)

  • Clear with light blue tint
  • Upper temperature limit: 500°F (260°C)
  • Excellent heat and chemical resistance
  • Better crack and stress resistance than FEP
  • Extremely smooth surface
  • Low vapor permeation
  • FDA Compliant
  • USP Class VI approved
FDA Compliant   Made with Genuine Viton®

Encapsulation wall thickness ranges from .010" (0.25mm) to 0.45" (1.14mm) depending on the cross section of the elastomeric core.

Solid and Hollow Core Cross Section Diagram Square and Rectangular Cross Section Diagram
 
Temperature Range
  FEP PFA
Silicone -75° to +400°F -75° to +500°F
  -60° to +205°C -60° to +260°C
Viton -15° to +400°F -15° to +400°F
  -26° to +205°C -26° to +205°C
EPDM -65° to +300°F -65° to +300°F
  -54° to +150°C -54° to +150°C

Characteristics of Encapsulated O-Ring Core Material

EPDM

  • General temperature range: -65° to +300°F (-54° to +150°C)
  • Good weather aging and ozone resistance
  • Excellent water & steam resistance
  • Good chemical resistance to many organic and inorganic acids and many polar solvents such as alcohols, ketones, and esters

Silicone

  • General temperature range: -67° to +500°F (-55° to +260°C)
  • Low compression set
  • Good heat resistance
  • Good low temperature resistance
  • Moderate solvent resistance
  • Ozone aging & weather resistance

Viton®

  • General temperature range: -15° to +400°F (-26° to +205°C)
  • Low compression set at elevated temperatures
  • Good ozone, weather and aging resistance
  • High heat resistance
  • Good for wide range of oils & solvents, such as aliphatic, aromatic & halogenated hydrocarbons, and vegetable oils
  • Acids
  • Low out gassing

Design Tip! Basically these three compounds are used as a spring inside of FEP or PFA encapsulation. Some chemicals are absorbed over time by FEP and PFA and permeate to the core. In that case care should be taken to select core material that is most compatible with the chemicals involved.

Helpful links:
[Cross Section & Groove Design] [Shelf Life] [Installation Instructions]

Design Recommendation Disclaimer:
Recommendations on application design and material selection are based upon available technical data and are offered as suggestions only. Each user should conduct evaluations to determine the suitability for his particular application. ROW, Inc. offers no express or implied warranties concerning the form, fit, or function of a product in any application.

O-Rings  •  Gaskets  •  New Products  •  Why Row  •  Tech Specs  •  Test Reports  •  Engineering Tools  •  Contact Us  •  About Us  •  Site Map  •  Home
© Copyright ROW INC., 729 W. Winthrop Avenue, Addison, IL 60101
(800) 770-7128 / (630) 628-9221 • Fax: (630) 628-9229

Email Us

Viton® is a registered trademark of DuPont Performance Elastomers.

Encapsulated O-Rings  USP Class VI O Rings   Other Resources