ROW INC. Encapsulated Gaskets and O-Rings ROW INC. Encapsulated Gaskets and O-Rings
Contact ROW INC.
About ROW INC.
ROW INC. Site Map
ROW INC. back to Home
ROW INC. Encapsulated Gaskets and O-Rings
ROW INC. O-RingsROW INC. Encapsulated GasketsNew Products from ROW INC.Choose Encapsulated Gaskets and O-Rings from ROW INC.Tech Specs for ROW INC. ProductsTest Reports for ROW INC. ProductsEngineering Tools for using ROW INC. Products

Shelf Life

Helpful links:
[Cross Section & Groove Design] [Shelf Life] [Installation Instructions]

Storage & Shelf Life of Elastomers & Fluoropolymer Tubing

Storage - Storage life varies with resistance of each synthetic elastomer to normal storage conditions.

Temperature - Avoid excessively high temperatures for long periods of time. An average not exceeding 75°F to 80°F with peaks not exceeding 100°F are recommended based on the storage conditions.

Ozone - Avoid excessive concentrations of ozone. Elastomers should not be stored near ozone generating equipment or operations such as welding. Most normally occurring ambient ozone levels are acceptable (providing the elastomer is not stored under tension).

Tension - Do not store elastomers under tension as that could promote ozone attack.

Chemicals - Do not store unlike elastomers in the same container as they can absorb volatile constituents from each other. For this same reason, do not store them near volatile chemicals.

Light - Shield elastomers from ultraviolet light. Sunlight is particularly harmful.

Packaging - Polyethylene bags stored in larger cardboard containers or polyethylene lined craft paper bags insure optimal storage life.

Shelf Life

Encapsulation Materials:

FEP - Unlimited shelf life
PFA - Unlimited shelf life

Elastomers:

Viton - 20 years
Silicone - 20 years
EPDM - 5 to 10 years

Design Recommendation Disclaimer:
Recommendations on application design and material selection are based upon available technical data and are offered as suggestions only. Each user should conduct evaluations to determine the suitability for his particular application. ROW, Inc. offers no express or implied warranties concerning the form, fit, or function of a product in any application.

O-Rings  •  Gaskets  •  New Products  •  Why Row  •  Tech Specs  •  Test Reports  •  Engineering Tools  •  Contact Us  •  About Us  •  Site Map  •  Home
© Copyright ROW INC., 729 W. Winthrop Avenue, Addison, IL 60101
(800) 770-7128 / (630) 628-9221 • Fax: (630) 628-9229

Email Us

Viton® is a registered trademark of DuPont Performance Elastomers.

Encapsulated O-Rings  USP Class VI O Rings   Other Resources