ROW INC. Encapsulated Gaskets and O-Rings ROW INC. Encapsulated Gaskets and O-Rings
Contact ROW INC.
About ROW INC.
ROW INC. Site Map
ROW INC. back to Home
ROW INC. Encapsulated Gaskets and O-Rings
ROW INC. O-RingsROW INC. Encapsulated GasketsNew Products from ROW INC.Choose Encapsulated Gaskets and O-Rings from ROW INC.Tech Specs for ROW INC. ProductsTest Reports for ROW INC. ProductsEngineering Tools for using ROW INC. Products

About Us

ROW, INC. was founded in 1976 for the development, production and marketing of highly engineered O-Rings with superior chemical resistance at normal and elevated temperatures. With its sight set squarely on the future, ROW, INC. created the TFE-O-SIL® line of silicone, Viton® and EPDM O-Rings encapsulated with FEP or PFA.

These O-Rings combine the chemical inertness of FEP or PFA on the outside with the resilience of an elastomer on the inside for a superior seal. Their natural resilience leads to maximum rebound. The inner core is vulcanized for extra strength and durability, particularly at elevated temperatures. And there is no air gap between the core material and the FEP or PFA; allowing less compression set. This combination of factors results in more effective, longer-lasting seals.

In addition, ROW, INC. has added FEP encapsulated silicone and Viton® square cross-section rings, and fully encapsulated TFE-O-SIL Gaskets for cam locking, quick disconnect couplings.

You can depend on ROW, INC. for reliable, quality products. Each and every O-Ring and Gasket meets strict quality control procedures and is inspected through every step of production. ROW, INC. maintains an extensive selection of stock products in a broad range of sizes and materials. Plus, ROW, INC. is dedicated to the continued development of new products to address the challenges posed by demanding new chemical and temperature applications.

ROW, INC. has the attitude, experience and production capabilities to meet your needs and specializes in custom sizes (inch and metric) with the industry's most responsive lead times and minimums.

Design Recommendation Disclaimer:
Recommendations on application design and material selection are based upon available technical data and are offered as suggestions only. Each user should conduct evaluations to determine the suitability for his particular application. ROW, Inc. offers no express or implied warranties concerning the form, fit, or function of a product in any application.

O-Rings  •  Gaskets  •  New Products  •  Why Row  •  Tech Specs  •  Test Reports  •  Engineering Tools  •  Contact Us  •  About Us  •  Site Map  •  Home
© Copyright ROW INC., 729 W. Winthrop Avenue, Addison, IL 60101
(800) 770-7128 / (630) 628-9221 • Fax: (630) 628-9229

Email Us

Viton® is a registered trademark of DuPont Performance Elastomers.

Encapsulated O-Rings  USP Class VI O Rings   Other Resources